Wednesday, June 12, 2013

how to hack tigo WAP in oder to get free internet tigo.

Settings (WAP)
Step 1 : Enter the Access point name (APN) Prepaid/postpaid customer : wap
Step 2 : Enter Session mode as Permanent with no user name and password
Step 3 : Enter website as http://wap.tigo.lk
Step 4 : Enter the IP Address as 192.168.104.4>>put this as ...
Step 5 : WAP 1X port : 9201, WAP 2X port : 9401

Settings (INTERNET)
Step 1 : Enter the Access point name (APN) Postpaid customer : internet
Step 2 : Enter Session mode as Permanent with no user name and password
Step 3 : Enter website as www.tigo.lk
Charges (GPRS)
GPRS Session will be charged at Rs. 2.
GPRS volume will be charged at 2 cents KB
Settings (MMS)
Step 1 : Enter the Access point name (APN) Prepaid/postpaid customer : mms
Step 2 : Enter Session mode as Permanent with no user name and password
Step 3 : Enter website as http://mms.tigo.lk:8085
Step 4 : Enter the IP Address as 192.168.104.4
Step 5 : WAP 1X port : 9201, WAP 2X port : 9401

HOW TO BROSWE FREE WITH YOUR DSTV, HITV, STARTIMES DECODER

FREE INTERNET BROWSING WITH YOUR DSTV, STARTIMES, MY TV, HITV 
(NEW OR OLD MODELS)
Many years ago, i came across some thing in the internet, how to browse free with phones, some months back its stop. Last two years until now i have been on this free internet and its been working for me and others. The best free internet presently is the Satellite Internet, which DSTV, STAR-TIMES, HITV, MY TV, are providers.
 SATELLITE INTERNET doesn’t affect signal or any damage to your Decoder, but add more values to it. Why pay some much for a bouquet and pay more on internet plans. When you can make use of this free internet with decoders.
The procedure are so simple and easy to follow:
Requirement:
  1. A Decoder (dstv, hitv, e.t.c.) (see fig 1)
  2. A Cable Modem
  3. RJ 45 NIC Cable
  4. SPLITTER
  5. A Router
  6. E16-12 Channel on your decoder…see more…….
Fig 1.  Decoderhttp://brightesiuke.com/dstv.gif
Fig 2.  Cable Modem
 Fig 3.  RJ 45 NIC Cable
 Fig 4.  SPLITTER
Fig 5. Router 
 Fig 6.E16-12 Channel on your decoder
These configuration is done on a scramble channel on the decoder. That gives the Access and IP for the Internet browsing. The configuration doesn’t affect any channel, but add one channel called Internet E16-12 (The Code is what you are paying for).
HOW TO SET UP:
1) CONNECT SPLITTER WITH DECODER CO AXIAL HOLE
2) CONNECT OTHER SIDE OF SPLITTER TO CABLE MODEM
3) CONNECT MODEM JACK TO SYSTEM
4) SWITCH ON THE WHOLE CONTRAPTION
5) CONFIGURE THE DECODER TO GET IP OR INTERNET CHANNEL ( E-16- 12)

How to encrypt your external drives (Locking your flash drives)

A lot of us that are into computer
security are always meticulous
about the security of our data. We
provide passwords on our PC. Some
of us go to the extent of creating
BIOS password, syskey, and then
the windows login password. Some
with extra paranoia will even use
softwares like folder lock or PGP to
encrypt their files and folders.
This
is really good and I am also a big
fan of security because I implement
it a lot but when I become the
attacker, I hate security.
I realized that all these accounting
bank managers that are so careful
with their data and some other
individuals also will just provide all
these security on their computers.
Forgetting the fact that some of
those information are in their flash
drives, they just drop their flash
drives carelessly sometimes.
Sometimes it may not be a careless
drop, you may get a physical
attack and your flash drive will be
stolen from you.

Here I will show you a way to
provide complete security to the
data on your flash drives and
other external drives.
You do not need to download any
software.

Note: This tutorial is for windows
users only

Follow these steps to encrypt your
drive:

1. Plug in the external drive into
the USB port

2. Go to my computer and right-
click the drive to be encrypted as
shown below
Now click "Turn on Bitlocker"

3. You will see something like this
Click the first check button and
provide the password you want for
your drive then click next

4. Our computers know we are
likely to forget some things so
they provide us with backup
option. Save a recovery file and if
suits you to print it then do that
and proceed
Now there is a big question for
you.
Are you ready to encrypt? If
you're with me on this then

continue
Grab a snack and chill for the
encryption to be over.
And that's it. The encryption is
over
To test this, you can unplug your
drive and plug again.
Now you
have to type your password. I hope
this post helps you security
fanatics

Airtel unlimited giggs trick

Airtel unlimited giggs trick

We all know airtel to be ths fastest network in nigeria . You would
want to add more grade to it when you hear this

Well airtel has been browsing free for sometime now, i dnt to waste
your time so lets just get down to the business of the day

HOW TO GET AIRTEL UNLIMITED GIGGS FOR FREE
[hr]
1. buy an airtel recharge card [#400]
2. Get another phone or you could umm ask your pal to help you with his phone

3. Now load the card and umm make sure the sim in the second phone
is not an airtel sim, u can make use of etisalat or mtn

4. Now call the number i.e the second number whnile it's still
ringing dial this code *440*5#
5. You would get erro codin..
Not to worry . Dial *141*712*0#
you would discover that u'av been credited with 100mega byte
6. Check your credit by dialin *123# . Your money is still intact

Repeat the above procidure to earn more

NOTE: do not allow the call to end while dialing these code, else you
would loss your #400
So i advice that you control your greed on this one .

you can also make use of #100 recharge card, with same procidure. Bt
this type you would have to make use of this code *440*6#

Enjoy it

Trick to Complete Formatting Mobile Phone

Here is the trick for complete
formatting of your virus infected
or other problem arriving mobile
phone...

This trick is for almost all Nokia
models.

1. Switch off your phone...

2. Remove SIM card & memory
chip...

3. Now press & hold keys - 3,*,call
green) ...

4. Then without leaving these three
buttons press power button...

5. Formatting task will be started...

6. Remember its a very rare
trick....
Yes its true its call hard format.
key * , 3 , Call button (green)
press and hold when display is on
than formatting screen is
displayed.
Wait for formatting to be finished,
Before carrying out this process
make sure you have copied all
your contacts and notes onto your
Memory, because every thing will
be deleted. When its finished the
formatted phone may be like new,
just like when u have brought it
from showroom.

Note: You can also make use of these procidure to flash a death phone.
You only need a flashing software when you want to upgrade the
firmware of the phone.

Cracking DSTV the easy way

For those who do not know already, there a few unencrypted channels on Eutelsat W4 and Eutelsat W7, both located at 36° East. DStv was formerly on W4 but is now beaming its signals from W7. The information I am sharing relates to how to view the unencrypted channels that share the same satellite as Multichoice’s DStv, and not how to illegally hack into DStv’s encrypted channels.

DStv decoders are designed, manufactured and sold to receive Multichoice services only. Therefore, I offer no guarantee that all the channels I am sharing would necessarily work on your DStv decoder. The DStv HD decoder for example, does not offer a “Public bouquet” and even for the single view decoders that do, one might be unable to watch the unencrypted channels once subscription is overdue. It would thus make the most sense to simply buy a good MPEG4-compatible digital satellite receiver and connect same to your satellite dish. There would be more on that later.



The free channels from China

The easiest unencrypted channels to watch are the following 3 TV channels from China Central Television (CCTV), the major state television broadcaster in mainland China:

CCTV News (formerly CCTV 9): this channel is targetted at an English-speaking international audience and mainly broadcasts news and current affairs programmes
CCTV-F: programming targetted at a French-speaking international audience
CCTV-4: an international channel broadcast in Chinese language

Any DStv decoders can view the CCTV channels whether your subscription is expired or not. So long your satellite is pointed towards 36° East.

If you are using a good Free-To-Air (FTA) digital satellite receiver, a blind scan should reveal the CCTV channels. Else, enter the following parameters to your receiver:

In South Africa – Frequency: 11637 Symbol rate: 22000 Polarization: Vertical FEC: 3/4
Rest of Africa – Frequency: 11940 Symbol rate: 27500 Polarization: Horizontal FEC: 3/4 and Frequency: 11862 Symbol rate: 27500 Polarization: Horizontal FEC: 3/4

The free channels from East Africa

In recent times, a few channels have emerged on Eutelsat W7 from Kenya, and beamed at the African continent:

NTV Kenya: a leading TV channel in Kenya offering news and general entertainment
KBC Channel 1: a TV service from the wholly-state owned Kenya Broadcasting Corporation
K24: a news and current affairs channel from Kenya
KTN Kenya: an all-round channel in Kenya. Arguably the leading TV station
NTV Uganda: a general entertainment channel targetted at Uganda

Parameters:

Frequency: 11731 Symbol rate: 8751 Polarization: Vertical FEC: 3/5
Frequency: 11716 Symbol rate: 3141 Polarization: Vertical FEC: 3/4

The free channels from Francophone West Africa

A bouquet of mostly French-speaking African channels exist on Eutelsat W4.

La Chaîne de Futur (LCF): a tv channel from Togo
Mboa TV: an entertainment TV channel based in France and exclusively dedicated to black-afro artists
RTS 1 (Senegal): Radiodiffusion Télévision Sénégalaise (RTS) is the Senegalese public broadcasting company
2STV: a TV channel in Senegal broadcasting mainly cultural programmes, interviews with local music and other artistic stars, and talkshows
Touba TV: a privately-owned TV channel in Senegal
ORTB TV: Office de Radiodiffusion et Télévision du Bénin (ORTB) is a the mainstream terrestrial television channel and radio operator in Benin
LoveWorld Plus: Christian-themed programming in English language from Nigeria

Parameters:

Frequency: 12437 Symbol rate: 23437 Polarization: Horizontal FEC: 3/4

Kindly note that the channels are subject to change without notice. Thus, re-scanning your receiver regularly ensures that you are constantly in the loop as to the current channels.

HOW TO UPGRADE AND RESTORE DEATH STRONG DECODER

HOW TO UPGRADE /RESTORE A DEATH STRONG DECODER.



Good day fellas today am going to talk about how to upgrade a strong decoder and how to restore a strong decoder thats death. When i say ''death'' i mean decoders that refused to turn on after upgrading the decoder this might be due to use of wrong or lower version of firmware on the decoder.



HOW TO UPGRADE A STRONG DECODER
NOTE:you have to make sure you are using a genuine strong decoder before doing this, cuz you might end up killing your decoder if you are making use of a fake strong one.


BASIC REQUIREMENTS

  • A flash drive


  • A rs-232 cable

  • The firmware [be sure of the firmware of your decoder. You can get this by checking the decoder. E.g srt4663XV, srt 4663XII e.t.c] you can download it from GUIDLINES
    1. Click on the link and visit the site. You would see something like this



    Click on the first box and select reciever, than in the second box select the reciever type . After that you download it and transfer the firmware into a flash drive.

    2.Now insert the flash drive in the strong decoder usb slot and press the menu button.

    3. Goto system>>>data transfer>>>firmware just wait for it to finish loading .... bravo you'av done it....

    ADVICE: Make use of a generator when upgrading a decoder.

    Now for does who during the process of upgrading their decoders killed it, hahaha they actually did the reverse .
    GOOD NEWS>>> you can actually bring your decoder back to life.

    BASIC REQUIREMENTS

    1. A personal computer{pc}
    2. A decoder that's some what like the death one
    3. A rs-232 cable

    The rs -232 cable is something like this

    Basically they are two ways :
    Restoring a death decoder using another decoder of same firmware

    1. Get a decoder that tallys with yours
    2. Get a rs-232 cable and insert the usb mouth in the new decoder ,while the other head is to be pluged at the back of the death decoder. Make sure you remove the death decoder from light.

    3. Using the new decoder goto menu>>>system settings>>>data transfer>>>then click on the firmware. Wait for it to load... wow you did it.

    Restore a death decoder using your pc< font>

    1. Goto the aboove link and download the srt loader and the firmware to your pc

    2. Lunch the srt loader >>> click on the browse button>>> locate your software and select

    3. Connect your rs-232 cable to the decoder and pc. Now press auto detect, once your decoder is dictated. Once your decoder is dictated click on download and wait for the process to complete.

    FREE INTERNET ACCESS ON ORANGE UGANDA USING PROXIEZ

    USING PROXIES ON ORANGE ----courteusy of Horny -cupid


    FREE INTERNET ACCESS ON ORANGE UGANDA USING PROXIEZ

    (Some might work on MTN UG) ..Domain/tunnel = m.facebook.com
    ->I'm posting this for tha last time coz I'm sick & tired of people over loading ma inbox wit Questions about free internet
    .........................................................................................................
    ............... .............
    hidemyass.com
    hidemy.biz
    browseunblocked.com
    152.26.53.5
    0001tool.info
    www.freeproxyserver.ca
    vvd1
    abeproxy.tk
    60.217.32.143 port 3128
    110.139.66.22 port 8080
    201.199.127.232 port 8080
    173.13.36.177 port 8080
    ...
    ........................................................................................................................ .............
    PC SETUP

    ...***Mozilla Firefox***...
    Lets use browseunblocked.com port 80.. Disable Java script script on yo browser (tools>>options>>content and disabled it).
    Input "m.facebook.com" as ur home page so that when u open ur browser,automatically it wil display "browseunblocked.com" page
    were u type yo web address or google".
    Input home page on ur browser(tools>>options>>general and type..m.facebook.com).
    ...***Google Chrome / Internet Explorer***...
    settings>>under the hood>>Network>>Change proxy settings>>connections>>LAN settings>>Proxy server>>Advanced
    ...***Opera***...
    Menu>>Settings>>Preferences>>Advanced>>Network>>Proxy Servers...
    ...***Avant Browser***...
    This is ma favorite web browser coz...
    1- It uses settings of all web browserz installed on a pc
    2- It has split screen view (view 2 pages at tha same time), Content Zoom, Full Screen and Full Desktop
    3- Auto Refresh (u set tha duration a page should refresh every after X seconds or X minutes)
    4- It has a fast download manager that can even download youtube files.. so no need of idm
    5- Quick switch from Direct Connection to Proxy vice versa without going to Options/Settings
    ........Tools>>Default Rendering Engine>> and choose the web browser u want to use plus its settings
    For downloads using avant go to Tools>>Downloads>>Options>> Input tha proxy address and port for HTTP & FTP Proxy Server
    ...***IDM (Internet Download Manager)***...
    to download youtube videos and other downloads (Its better if yo browser downloads files which are not videos)
    options>>proxy and type the proxy yo using. i.e browseunblocked.com port 80
    ........................................................................................................................ .............
    PHONE SETUP
    Http/ip address= browseunblocked.com or 69.162.137.252....port = 80....apn/access point = orange.ug....homepage = m.facebook.com
    ....they work on all phonez even china phones (2,3,4 sim-card phonez)
    and some china phones run java apps so download ucweb handler from umnet.com to load pages faster.........
    if yo using opera, ucweb, bolt, firefox for original non-china phones etc ,its beta u download handler versionz from umnet.com
    ........................................................................................................................ .............
    IF ONE PROXY FAILS, TRY ANOTHER!!

    MEMORY CARD PASSWORD RETRIEVAL

    MEMORY CARD PASSWORD RETRIEVER.



    This is a very short tutorial , basically it is meant to help you recover your lost memory card password .

    STEPS

    1. Just download this symbian application Download

    2.PUT the memory card with the lost password in your card slot.

    3.Open the application >>>press option>>> choose the first option.

    4 And the password would popup . Thats all .
    Simple uhn, enjoy it

    HOW TO GET PASSWORD AND EMAIL FROM A PHISHING SITE

    TODAY IM GONE TEACH YOU HOW
    TO GET FACEBOOK EMAIL AND
    PASSWORD FROM A PHISHING
    SITE

    1) FIRST COPY ONE OF THE
    GOOGLE DORK BELOW AND PASTE
    IT IN GOOGLE SEARCH ENGINE

    i) intext:charset_test= email=
    default_persistent=

    ii) inurl:"passes" OR
    inurl:"passwords" OR
    inurl:"credentials" -search -
    download -techsupt -git -games -gz -
    bypass -exe filetype:txt
    @yahoo.com OR @gmail OR
    @hotmail OR @rediff

    2) THEN YOU WILL GET SOME
    SITES JUST CLICK ONE AND SEE
    THE EMAIL AND PASSWORD

    Tomb Raider Full Pc Game + Crack

    Tomb Raider is an upcoming action-adventure platform video game. Published by Square Enix,
    Tomb Raider is the fifth title developed by Crystal Dynamics in the Tomb Raider franchise.
    As the first entry in a new Tomb Raider continuity, the game is a reboot that emphasizes
    the reconstructed origins of the culturally influential lead character Lara Croft.[4][5]
    Tomb Raider is scheduled for release on March 2013 for PlayStation 3, Xbox 360
    and Microsoft Windows.[3] It has become the first Tomb Raider game to be given
    an "M" (Mature) rating by the Entertainment Software Rating Board,
    and also the first Tomb Raider game to be rated "18+" by Pan European Game Information.
    Tomb Raider Minimum System Requirements

    OS: Windows XP Service Pack 3

    CPU: Intel Core 2 Duo E6300 1.86GHz or AMD Athlon 64 2.1GHz 4050+

    RAM: 1GB System Memory

    GPU: Nvidia GeForce 8600 GT or ATI Radeon HD 2600 XT

    DX: DX 9

    HDD: 5 Gb Free Hard Drive Space



    Tomb Raider Recommended System Requirements

    OS: Windows 7 64bit

    CPU: Intel Core i5-750 2.4GHz or AMD Phenom II X2 565 3.4GHz

    RAM: 4GB System Memory

    GPU: Nvidia GeForce GTX 480 or Radeon HD 4870

    DX: DX 11

    FREE TO AIR CONFIGURATION OF DSTV DECODER ,MYTV/STRONG DECODERS

    Free DSTV Channels, Tricks
    and Codes

    These are the following
    channels you will pick after
    entering the settings below:
    Lotus FM, Mindset Health,
    Botswana TV, Vivid Mosiac,
    RADIO Radio2000, Hope
    Channel Africa, ITV, Astro
    and various commercial
    channels. God TV Africa,
    SAFM, Ikwekwezi FM, 5FM,
    RSG, Lesedi FM, Trans World
    Radio, Metro FM, Good Hope
    FM, Channel Africa, Classic
    FM, DW Radio, Radio Pulpit/
    Kansel, Impact Radio, Radio
    Pretoria, ASTV, YFM. .


    No: 1 Setting up of your
    decoder, make sure that your
    decoder software is updated
    to the latest version. To do
    this update: Press the Menu
    button. Select "Advanced
    Options" and press OK. Select
    "DSD UPGRADE" and press
    OK. The decoder should start
    to upgrade the software now.


    No: 2 Press menu Select
    "Advanced Options" Select
    "Dish Installation" Enter the
    pin "9949" Select "Network
    Configuration" Select
    "Network 2 Setup" NB:
    Leave "Network 1 Setup
    (Home)" unchanged!! Set
    Signal Setup to "Enabled" by
    selecting it, and moving left
    or right Set Frequency to
    "11170" Set Symbol Rate to
    "26652 Set Polarization to
    "Vertical" Set FEC to "3/4"
    Select "Accept these
    settings"

    No: 3 Select "Network 3
    Setup" Set Signal Setup to
    "Enabled" Set Frequency to
    "11625" Set Symbol Rate to
    "15000 Set Polarization to
    "Vertical" Set FEC to "3/4"
    Select "Accept these
    settings"

    No: 4 Select "Network 4
    Setup" Set Signal Setup to
    "Enabled" Set Frequency to
    "11674" Set Symbol Rate to
    "26652 Set Polarization to
    "Vertical" Set FEC to "5/6"
    Select "Accept these
    settings"

    No: 5 Select "Network 5
    Setup" Set Signal Setup to
    "Enabled" Set Frequency to
    "12522" Set Symbol Rate to
    "26657 Set Polarization to
    "Horizontal" Set FEC to
    "1/2" Select "Accept these
    settings"

    No: 6 Select "Network 6
    Setup" Set Signal Setup to
    "Enabled" Set Frequency to
    "12562" Set Symbol Rate to
    "26657 Set Polarization to
    "Horizontal" Set FEC to
    "1/2" Select "Accept these
    settings"

    No: 7 Select "Network 7
    Setup" Set Signal Setup to
    "Enabled" Set Frequency to
    "12682" Set Symbol Rate to
    "26657 Set Polarization to
    "Horizontal" Set FEC to
    "1/2" Select "Accept these
    settings"

    No: 8 Select "Network 8
    Setup" Set Signal Setup to
    "Enabled" Set Frequency to
    "12722" Set Symbol Rate to
    "26657 Set Polarization to
    "Vertical" Set FEC to "1/2"
    Select "Accept these
    settings"

    No: 9 Exit once to go back to
    the "Dish Installation" menu
    Select "Scan All Networks"
    Your decoder will go into
    scanning mode and might
    take a while to scan all 9
    networks. Do not interrupt
    the process even if it seams
    to take longer than you
    expected! Once completed,
    your picture will return as
    normal

    NOW FOR MYTV USERS
    Make use of these steps

    1. Goto installation
    2.press enter and enter your security code. E.g 0000
    3. Now goto blind scan
    4. you would see list of satelite channels
    5. For sport select w4w7 and blind scan
    6. For any other channel like nollywood plus, nollywood, ifilms. E.t.c
    You can scan intelsat 7,10/k

    7. The above steps would not unlock channels but would give you free
    to air channels.
    With somany dstv channels attached to it.

    YOU CAN ALSO HACK THE SCRAMBLED CHANNELS AND MAKE THEM WORK FOR FREE.
    USING BISS CODE,GONGLE AND SOME OTHER TRICKS ATTACHED TO IT.

    WATCH OUT FOR MY NEXT POST ON SATELITE SETTINGS . YOU WOULD GET THE
    BISS CODE FOR EACH CHANNEL.

    .

    Skype Credit Generator v8.2.3 (2013)

    Instruction
    Open Skype Credit Generator v8.2.3
    Enter Usser & Pass
    Slelect Credit Value
    Click button generate and wait for your credit is generate
    Click button send credit to your account
    Enjoy!

    Recomandation!
    Use it one time at week!!!

    Wifi Password Hack 2013

    This time we bring you the best software to hack the WiFi networks 2013.
    The compilation includes powerful encryption software in network
    detection and ideal for hacking WiFi networks.